Modbus register maps for Korean devices
Modbus addresses, types, units, scaling and defaults for 10 Korean inverters, temperature controllers and power meters — manual references, JSON (CC BY 4.0).
Panel meter
Temperature controller
Autonics TK Series
Heating & cooling PID temperature controller. Only RS485-option models are Modbus RTU slaves. Covers coils (RUN/STOP, auto-tuning), input registers (PV, SV, MV, indicator status) and holding registers (SV, PID, input, alarm, comm).
39 registers →Autonics TX Series
Single-output PID temperature controller. Only option T/B models have RS485 Modbus RTU. Covers coils (RUN/STOP, AT, alarm reset), input registers (PV, SV, indicators) and holding registers (SV, PID, input, alarm, comm).
36 registers →Hanyoung Nux VX Series
RS485 2-wire. Modbus RTU/ASCII access to D-registers with FC 03/06/16. Temperature decimals follow DP-P.
40 registers →Other
Power meter
LS ELECTRIC GIMAC1000
Measurements in input registers (FC04) as Float32 engineering units, device info as strings in holding registers (FC03), resets as coils (FC05). 32-bit word order depends on the Swap setting.
37 registers →Rootech Accura 2300[S]
The 2300[S] measures voltage and collects current/power from up to 40 Accura 2350 modules (ID 0-39), served over Modbus TCP/RTU. Measurement registers are private-read: read 11044 first to fetch.
43 registers →Rootech Accura 3300E
3-phase multifunction power meter. RS-485 Modbus RTU; all data in holding registers (FC03), 32-bit values high word first.
43 registers →Inverter (VFD)
About this dataset
- Only facts (address, type, unit, scale, read/write) taken from manuals the makers publish, each with document title, edition, page and the date checked. Anything not confirmed in a manual is left out.
- Unofficial and not affiliated with the makers. Values can differ by firmware or model — check the device manual before writing.
- JSON:
https://raw.githubusercontent.com/portdock/PortDock/main/data/devices/<maker>/<model>.json· schema.json · index.json · llms.txt - License: CC BY 4.0 (LICENSE) — free to use with attribution.
- The same data is built into PortDock Modbus Master («Device profile…») and Modbus Slave («Emulate device…»).